BioRid® Brush
TECHNICAL INFORMATION 2007.05.31
MOULD PROTECTION

Product description
Mikroporous, water-based compound. BioRid gives the same good condensation protection as Grafoherm. The BioRid method is patented.

Range of application
Mould and condensation protecting coating designed for food industry and other areas with high hygienic demands.

Application
Airless spray and brush or roller application.

Special properties
- Mould and condensation preventing
- Retains sanitisers long enough to get maximum disinfection effect
- No emissions
- Does not release harmful gases in case of fire
- Completely permable
- Movement absorbing
- Vibration damping and heat insulating

Pretreatment
Affected surfaces are washed with BioWash. The surface is then primed with BioSeal. Rusty surfaces will discolour the coating. Use a suitable anti-corrosive coating.
 
TECHNICAL INFORMATION
Density:
Solids content by volume:
Solids content by weight:
Effective consumption:
Drying time at 20o C 65% RF, 1.0 mm:
Working temperature:
Cleaning:
Surface structure:
Standard colour:
Damping factor:
Damping factor:
Thermal conductivity:
Risk category:		 1,2 g/cm³
65%
38%
0,5-1,0 kg/m² wet compound
Dried through after 8-12 hours
Not lower than 5° C
Water
Light textured
White
0,106 (1,5 mm coat thickness)
0,225 (3,0 mm coat thickness)
0,085 W/m.K. (0,0735 kcal/m.h.° C)
No emission of VOC (<10µm/m², h)
Frost free storing required. Avoid strong sunlight.