| The superior asbestos
encapsulation system |
| |
AsbestGuard is recommended for all types of
asbestos encapsulation. AsbestGuard has unique properties, which guarantee that the
encapsulation does not damage the good technical characteristics of asbestos: fire
protection, anti-condensation, insulation and noise damping.
Most important: AsbestGuard does not destroy the fire classification, when asbestos
is used as fire insulation according to ASTM - P189 and
ASTM - E119
AsbestGuard is a reinforced compound and requires Airless Spray Equipment for highly
viscous and coarse-grained, water-based material.
Decisive for the choice of abatement method is the condition and location of the
asbestos. Damage to asbestos insulation is often caused by condensation water being
trapped and forming cavities in the insulation and making the asbestos come loose.
Investigate the condition of the asbestos by knocking at it (Knock as you do when
you try to locate holes in a wall). If the asbestos answers by an empty sound or falls
down at this treatment, it should not be encapsulated. Press your hand at parts that
behave in this way. You can easily feel cavities or loose asbestos.
If most of the asbestos is in good condition, small damaged parts can be repaired
with suitable insulation material.
Never encapsulate asbestos that has repeatedly been exposed to mechanical damage.
We recommend that such asbestos be taken away or encased.
It is mostly just parts of the premises that risk mechanical damages. These parts
should be built in or replaced by another insulation material while the rest of the
premises can be encapsulated. |
| |
 |
| |
Encapsulation
Spray a fine mist of AsbestBinder over the surface. This binds loose asbestos so
that it will not whirl around during the continued sanitation process. AsbestBinder works
at the same time as a primer on an absorbing material.
Cover the asbestos with AsbestGuard. |
| |
Total removal
Spray cleaned surfaces with AsbestBinder. Encapsulate with AsbestGuard asbestos that can
not be removed for construction reasons. Spaces that are difficult to reach are sprayed
with AsbestBinder. |
| |
|
|
A
permit for the encapsulation of asbestos is required.
Consult a reputable sanitation company or an inventory consultant. |
|
|
AsbestGuard® |
|
- does not change the fire classification of
asbestos fire insulation
- reinforces the technical properties of the asbestos
- is insulating and preventing condensation
- in unflammable and noise damping
- is highly elastic and reinforced
- is strong and resists movements in the construction
- stays as long as the bedding
- is open to diffusion and releases condensation
- has good adhesion and binds loose fibres effectively |
| |
| AsbestBinder and AsbestGuard can be applied by
spray equipment or brush. |
| |
|
